Procurar Trocando A Fonte Energética, Interruptor De Alimentação, Fonte De Alimentação Do Interruptor Do Diodo Emissor De Luz no diretório Industry Directory, fabricante / fornecedor / Fábrica confiável a partir de China

Cesta de Consulta (0)
Página inicial > Lista de Produto > Fonte de alimentação de comutação de saída única > Fonte de alimentação do modo de comutação, fonte de alimentação AC / DC

Fonte de alimentação do modo de comutação, fonte de alimentação AC / DC

Informação básica

Modelo:  0MWNES-50-24

Descrição do produto

Modelo NO .: 0MWNES-50-24 Garantia:> 2 anos de tensão de entrada: 24V Modo de partida: Alimentação de comutação auto-excitada Sistema de fornecimento de energia: Sistema de modulação do equipamento de distribuição de energia do terminal: PFAW Marca: pacote de transporte Omwo: exportação de exportação padrão Origem: Zhejiang Tipo de saída: Único Potência de saída: 1 - 50W Modo de conexão: Série Comutação Tensão de alimentação Tensão Modo de regulação: Freqüência Tipo de modulação Transmissão de energia: Certificado de transmissão de dois sentidos: CE, UL, RoHS, ISO, CCC, CB, CSA Marca registrada: OMWO Especificação: 159 * 98 * 38mm Código HS: 8504401990 Características do adaptador de fonte de alimentação ac / dc 13v
Alcance de entrada CA selecionável por switch
Proteções: curto-circuito / Sobrecarga / Sobretensão
Arrefecimento por convecção de ar livre
Indicador LED para ligar
100% de teste de queima de carga
Alta eficiência, longa vida e alta confiabilidade
Garantia de 2 anos
Especificações do adaptador de fonte de alimentação ac / dc 13v
* Entrada AC universal / alcance total
* Proteções: curto-circuito / Sobrecarga / Sobretensão / Sobre temperatura
* Arrefecimento por convecção de ar livre
* 100% de teste de queima de carga
* 2 anos de garantia


MODEL NES-50-5 NES-50-12 NES-50-15 NES-50-24 NES-50-48
 
 
 
 
  
OUTPUT
DC VOLTAGE 5V 12V 15V 24V 48V
CURRENT RANGE 0 ~ 10A  0 ~ 4.2A  0 ~ 3.4A  0 ~ 2.2A 0 ~ 1.1A
RATED CURRENT 10A 4.2A 3.4A 2.2A 1.1A
RATED POWER 50W 50.4W 51W 52.8W 52.8W
RIPPLE & NOISE (max.)  Note.2 80mVp-p   120mVp-p 150mVp-p 200mVp-p 240mVp-p
VOLTAGE ADJ. RANGE 4.75 ~ 5.5V  10.8 ~ 13.2V  13.5 ~ 16.5V 21.6 ~ 26.4V  43.2 ~ 52.8V
VOLTAGE TOLERANCE
NOTE.3
2.0% 1.0% 1.0% 1.0%   1.0%
LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5%
LOAD REGULATION 0.5% 0.5% 0.5% 0.5% 0.5%
SETUP, RISE TIME NOTE.5 500ms, 30ms/230VAC   1200ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.) 50ms/230VAC    10ms/115VAC at full load
 
 
 INPUT
VOLTAGE RANGE 85 ~ 264VAC   120 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 79% 82% 83% 86% 87%
AC CURRENT (Typ.) 1.1A/115VAC   0.65A/230VAC
INRUSH CURRENT (Typ.) COLD START 45A
LEAKAGE CURRENT <2mA / 240VAC
 
PROTECTION
OVER LOAD 110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 5.75 ~ 6.75V  13.8 ~ 16.2V  17.25 ~ 20.25V 27.6 ~ 32.4V   55.2 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover
 
  
ENVIRONMENT
WORKING TEMP. -20 ~ +60oC (Refer to output load derating curve)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +85oC , 10 ~ 95% RH
TEMP. COEFFICIENT 0.03%/oC (0 ~ 45oC )
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for  60min. each along X, Y, Z axes
 
  
SAFETY &EMC(Note 4)
SAFETY STANDARDS UL60950-1, CB(IEC60950-1) approved
WITHSTAND VOLTAGE  I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT Compliance to EN61000-3-2,-3
EMS
IMMUNITY
Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, light industry level, criteria A
 OTHERS MTBF 374.2K hrs min. MIL-HDBK-217F (25 )
DIMENSION 129*98*38mm (L*W*H)
PACKING  0.41Kg; 45pcs/19.5Kg/1.24CUFT
  
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25oCof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meetsEMC directives.
Switching Mode Power Supply, AC/DC Power Supply
Switching Mode Power Supply, AC/DC Power SupplySwitching Mode Power Supply, AC/DC Power SupplySwitching Mode Power Supply, AC/DC Power SupplySwitching Mode Power Supply, AC/DC Power SupplySwitching Mode Power Supply, AC/DC Power Supply

Grupo de Produto : Fonte de alimentação de comutação de saída única