Nes-25-48 Ce RoHS LED Driver Switch Alimentação

Modelo: MWNES-25-48 Garantia:> 2 anos de tensão de entrada: 24V Modo de partida: auto-excitado Switching Power Supply Sistema de fornecimento de energia: Terminal Equipamento de distribuição de energia Sistema de modulação: PFAW Marca: Omwo Especificação: 159 * 98 * 38mm HS Código: 8504401990 Tipo de saída: Único Potência de saída: 1 - 50W Modo de conexão: Comutação da série Tensão de alimentação Modo de regulação: Tipo de modulação de freqüência Transmissão de energia: Certificado de transmissão de dois sentidos: CE, UL, RoHS, ISO, CCC, CB, CSA Trademark : OMWO Origem: Zhejiang 25W NES-25-48 MEAN WELL /
* Entrada AC universal / alcance total
* Proteções: curto-circuito / Sobrecarga / Sobretensão / Sobre temperatura
* Arrefecimento por convecção de ar livre
* 100% de teste de queima de carga
* 2 anos de garantia
1.High Efficiency e bom preço. Filtro EMI embutido
Teste de queima de carga total de 3.100%
4. Ondulação de saída e ruído baixos
5.Proteção: Sobre carga / Sobretensão / Curto circuito

MODEL		NES-25-5	NES-25-12	NES-25-15	NES-25-24	NES-25-48
OUTPUT	DC VOLTAGE	5V	12V	15V	24V	48V
	CURRENT RANGE	0 ~ 5A	0 ~ 2.1A	0 ~ 1.7A	0 ~ 1.1A	0 ~ 0.57A
	RATED CURRENT	5A	2.1A	1.7A	1.1A	0.57A
	RATED POWER	25W	25.2W	25.5W	26.4W	27.36W
	RIPPLE & NOISE (max.)  Note.2	80mVp-p	120mVp-p	150mVp-p	200mVp-p	240mVp-p
	VOLTAGE ADJ. RANGE	4.75 ~ 5.5V	10.8 ~ 13.2V	13.5 ~ 16.5V	21.6 ~ 26.4V	43.2 ~ 52.8V
	VOLTAGE TOLERANCE NOTE.3	2.0%	1.0%	1.0%	1.0%	1.0%
	LINE REGULATION	1.5%	0.5%	0.5%	0.5%	0.5%
	LOAD REGULATION	1.5%	0.5%	0.5%	0.5%	0.5%
	SETUP, RISE TIME NOTE.5	500ms, 30ms/230VAC   1200ms, 30ms/115VAC at full load
	HOLD UP TIME (Typ.)	50ms/230VAC    10ms/115VAC at full load
INPUT	VOLTAGE RANGE	85 ~ 264VAC   120 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	78%	83%	84%	86%	86%
	AC CURRENT (Typ.)	0.55A/115VAC     0.35A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 45A
	LEAKAGE CURRENT	<2mA / 240VAC
PROTECTION	OVER LOAD	110 ~ 150% rated output power
		Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	5.75 ~ 6.75V	13.8 ~ 16.2V	17.25 ~ 20.25V	27.6 ~ 32.4V	55.2 ~ 64.8V
		Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-20 ~ +60oC (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85oC , 10 ~ 95% RH
	TEMP. COEFFICIENT	0.03%/oC (0 ~ 45oC )
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, period for  60min. each along X, Y, Z axes
SAFETY &EMC(Note 4)	SAFETY STANDARDS	UL60950-1, CB(IEC60950-1) approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
	HARMONIC CURRENT	Compliance to EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, light industry level, criteria A
OTHERS	MTBF	411.47Khrs min. MIL-HDBK-217F (25 )
	DIMENSION	99*82*35mm (L*W*H)
	PACKING	0.3Kg; 45pcs/14.5Kg/0.66CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25oCof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meetsEMC directives.

Grupo de Produto : Fonte de alimentação de comutação de saída única