China Alta Qualidade 35W Small Size 12V Switch Power Supply Fabricantes

todas as categorias

novos produtos

Página inicial > Lista de Produto > Fonte de alimentação de comutação de saída única > Alta Qualidade 35W Small Size 12V Switch Power Supply

Alta Qualidade 35W Small Size 12V Switch Power Supply

Informação básica

Modelo: MWNES-35-2

Descrição do produto

N ° de Modelo: MWNES-35-2 Garantia:> 2 Anos Tensão de Entrada: 15V Modo de Partida: Auto-excitada Switching Power Supply Sistema de Alimentação: Terminal de Distribuição de Energia Sistema de Modulação do Equipamento: PFAW Marca: Omwo Especificação: 159 * 98 * 38mm HS Código: 8504401990 Tipo de saída: Single Potência de saída: 1 - 50W Modo de conexão: Série Switching Voltagem de alimentação de energia Modo de regulagem: Freqüência Tipo de modulação Transmissão de energia: Two-way Transmission Certificação: CE, UL, RoHS, ISO, CCC, CB, CSA : OMWO Origem: Zhejiang 35W Fonte de alimentação de comutação de saída única Série NES-35 Características: Entrada AC universal / Protecções de gama completa: Curto circuito / Sobrecarga / Sobretensão Arrefecimento por convecção de ar livre 100% carga total teste de queima 2 anos de garantia 12v transformador

SPECIFICATION
OUTPUT
Model	NES-35-2.7		NES-35-5	NES-35-12		NES-35-15			NES-35-24		NES-35-48
DC Voltage	2.7V		5V	12V		15V			24V		48V
Rated Current	6A		7A	3A		2.4A			1.5A		0.8A
Current Range	0-7A		0 ~ 7A	0 ~ 3A		0 ~ 2.4A			0 ~ 1.5A		0 ~ 0.8A
Rated Power	35W		35W	36W		36W			36W		38.4W
Ripple & Noise	80mVp-p		80mVp-p	120mVp-p		150mVp-p			200mVp-p		240mVp-p
Voltage Adj. Range	2.43~ 2.97V		4.75 ~ 5.5V	10.8 ~ 13.2V		13.5 ~ 16.5V			21.6 ~ 26.4V		43.2 ~ 52.8V
Voltage Tolerance	±2.0%		±2.0%	±1.0%		±1.0%			±1.0%		±1.0%
Line Regulation	±0.5%		±0.5%	±0.5%		±0.5%			±0.5%		±0.5%
Load Regulation	±0.5%		±0.5%	±0.5%		±0.5%			±0.5%		±0.5%
Setup, Rise Time	500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
Hold Up Time	50ms/230VAC 10ms/115VAC at full load

INPUT
Voltage Range	85 ~ 264VAC 120 ~ 370VDC
Frequency Range	47 ~ 63Hz
Efficiency	78%	81%			83%		85%			86%
AC Current	0.75A/115VAC 0.5 A/230VAC
Inrush Current	Cold Start 45A
Leakage Current	<2mA / 240VAC

PROTECTION
Over Load	110 ~ 150% rated output power
	Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage	5.75~6.75V	13.8~16.2V			17.25~20.25V			27.6~32.4V		55.2~64.8V
	Protection type: Shut down o/p voltage, re-power on to recover

ENVIRONMENT
Working Temp.	-20 ~ +60°C (Refer to "Derating Curve")
Working Humidity	20 ~ 90% RH non-condensing
Storage Temp., Humidity	-40 ~ +85°C, 10 ~ 95% RH
Temp. Coefficient	±0.03%/°C (0 ~ 45°C)
Vibration	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC
Safety Standards	UL60950-1, CB(IEC60950-1),CCC GB4943 approved
Withstand Voltage	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH
EMC Emission	Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC Immunity	Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, EN55024, EN61000-6-1, light industry level, criteria A

OTHERS
Dimension	999736mm (LWH)
Weight	0.32Kg
Packing	60pcs/21.6Kg

NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.