Fonte de alimentação comutada LED Wxe-50net-B 50W, SMPS
Informação básica
Modelo: WXE-50NET-B
Descrição do produto
N ° de Modelo: WXE-50NET-B Garantia:> 2 Anos Tensão de Entrada: 15V Modo de Partida: Auto-excitada Fonte de Alimentação comutada Sistema de Alimentação: Terminal Distribuição de Energia Sistema de Modulação: PFAW Marca: Omwo Pacote de Transporte: Padrão Embalagem de Exportação Origem: Zhejiang Tipo de saída: Single Potência de saída: 1 - 50W Modo de conexão: Série Switching Power Supply Voltage Modo de regulagem: Frequency Modulation Type Transmissão de energia: Two-way Transmission Certificação: CE, UL, RoHS, ISO, CCC, CB, CSA Especificação: 159 * 98 * 38mm Código do HS: 8504401990 Especificações \ nFonte de alimentação de comutação WXE-50NET-B \ nProtecção: SC / OC / OV \ nResfriamento por convecção de ar livre \ nDê uma Saída Tripla \ n2 Ano de Garantia \ nBateria de Saída Tripla de Alimentação NET -50A Fonte de alimentação comutada de LED de 50W, fonte de alimentação SMPS \ n \ nCaracterísticas: \ n \ nUnidade CA universal / Alcance total \ nProtecções: curto-circuito / sobrecarga / sobretensão \ nReferenciamento por convecção de ar livre \ n100% de teste de carga total \ n2 anos de garantia \ n \ nEspecificação: \ n
\ n
MODEL | WXE-50NET-B | |||
OUTPUT | OUTPUT NUMBER | CH1 | CH2 | CH3 |
DCVOLTAGE | 5V | 12V | -5V | |
RATEDCURRENT | 4A | 2A | 0.5A | |
CURRENTRANGE | 0.6~5A | 0.2-2.5A | 0.1-0.7A | |
RATED POWER | 46.5W | |||
RIPPLE&NOISENOTE.2 | 80MVP-P | 120mVp-p | 120mVp-p | |
VOLTAGEADJ.RANGE | CH1: 4.75~5.5V | |||
VOLTAGETOLERANCENOTE.3 | ±2.0% | ±6.0% | ±5.0% | |
LINEREGULATION | ±0.5% | ±1.0% | ±1.0% | |
LOADREGULATION | ±1.5% | ±3.0% | ±1.0% | |
SETUP.RISEHOLD.TIME | 500ms,30ms/230VAC ,1200ms, 30ms/115VAC at full load | |||
HOLD TIME | 50ms/230vac 10ms/115vac at full load | |||
INPUT | VOLTAGERANGE | 85~264VAC 120~370VDC | ||
FREQUENCYRANGE | 47~63HZ | |||
EFFICIENCY | 76% | |||
AC CURRENT | 1.1A/115vac 0.65A/230VAC | |||
INRUSH CURRENT | COLD START 45A | |||
LEAKAGECURRENT | <2mA/240VAC | |||
PROTECTION | OVERLOAD | 110~150% rated outputpower | ||
Protection type:Hiccup mode,recovers automatically after fault condition is removed | ||||
OVER VOLTAGE | CH1:5.75~6.75V | |||
Protection type:Shut down o/p voltage,re-power on to recover | ||||
ENVIRONMENT | WORKINGTIMP | -20~+60°C (Refer to "Derating Curve") | ||
WORKINGHUMIDITY | 20~90% RH non-condensing | |||
STORAGE TEMP HUMIDITY | -40~+85°C 10~95%RH | |||
TEMPCOEFFICIENT | ±0.03%/°C (0~45°C ) | |||
VIBRATION | 10~500HZ,2G10min/1cycle period for 60 min each alongX,Y,Zaxes | |||
SAFETY&EMC | SAFETYSTANDARDS | UL60950-1 Approved,CB Approved by TUV(design Refer to IEC 60950-1) | ||
WITHSTAND VOLTAGE | 1/P-0/P:3KVAC 1/P-FG:2KVAC 0/P-FG:0.5KVAC | |||
ISOLATIONRESISTANCE | 1/P-0/P,1/P-FG,0/P-FG:100M Ohms/500VDC/25°C/70%RH | |||
EMI CONDUCTICN& | Compliance to EN55022(CISPR22) Class B | |||
RADIATION | ||||
HARMONICCURRENT | Compliance to EN61000-3-2,-3 | |||
EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204,EN50204,EN61000-6-1 Light industry level criteria A | |||
QTHERS | MTBF | 348.4 Khrs min MIL-HDBK-217F(25°C) | ||
DIMENSION | 129*98*38mm(L*W*H) | |||
PACKING | 0.44Kg ;30pcs / 14.2Kg / 0.72CUFT | |||
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature. | |||
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||||
3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||||
4. Line regulation is measured from low line to high line at rated load. | ||||
5. Load regulation is measured from 20% to 100% rated load. and other output at 60% rated load. 6.Each output can work within current range.But total output power can`t exceed rated output power. | ||||
7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.For Guidance on how to perform these EMC tests.please refer to "EMI testing of component power supplies" |
Grupo de Produto : Fonte de alimentação de comutação de saída única
Premium Related Products
outros produtos
produtos quentes
Suporte de inserção da ferramenta de torneamento indexávelMochila solar impermeável de camuflagemPlug Power Meter Socket com grande LCD 10A 220V2 Lâmpadas LED Down Light 20W Forma quadrada Iluminação interna embutidaInterruptor de luz da porta do armário do congeladorSensor de temperatura de termopar de tipo K de alta qualidadeDisposer alto do lixo do desperdício de alimento da quantidadeDisjuntor de caixa moldada série Cm1 / MCCBGabinete de mudança de mudança de alta qualidadeRelé de trava do relé do relé 250VAC 3b do 150A relé de trava do reléInterruptor de proximidade indutivo de cilindro de alta qualidadeSensor de movimento de infravermelho de alta qualidadeWxe-35s-2 AC / DC Saída Única Compacta Fechada LED Fonte de Alimentação10W 24V Industrial DIN Rail Power SupplyFonte de alimentação Fonte SMPS 12V 50W LED Driver 12V 4A Power DriverMwnes-35-48 48V LED Switching Power Supply